[ROM][JB.16][CDMA] BloodRage v1.3 *Update* 9/9

If you think 1.05 is flying..... wait till you set it at 1.325

Bumping right muthafuckin now...

I edited your post...... now it looks right LOL ... hope you don't mind

Lmao...nah I don't mind...that shit is seriously fast

I love this site LOL

JL,nice work!Its running great, but the echo commands are one line too long as overclocking goes. I just changed echo 4 to 1325 and it's working. SetCPU only reads 4 lines and was running at 1050 max. Just lettin u know

Sparkymrh wrote: JL,nice work!Its running great, but the echo commands are one line too long as overclocking goes. I just changed echo 4 to 1325 and it's working. SetCPU only reads 4 lines and was running at 1050 max. Just lettin u know

that is strange because i used the same frequency table as in the flashable method. i will check it out asap and if needed a bug fix will be released immediately. thanks for the heads up man!!!  

Changed echo 4 ?..... on mine echo 4 is 1325 .... echo 3 is 1050

And cpu-z is showing 1200..... could i edit echo 3 out ?

Echo 4 was good for me as well

johnthehillbilly wrote:And cpu-z is showing 1200..... could i edit echo 3 out ?

i would not recommend taking out echo3 but are you saying you only get 1200mhz after removing the comments from the script?

Yeah...... 1200 on both cores, at 100% load.....

And yeah .... I found out taking out echo 3 spells bad news....hot reboot hot reboot hot reboot hot reboot....... had to push 90modules back via adb before it hot rebooted again......

I know this is a stupid question but you removed the comments from the script?

#!/system/bin/sh
#
#--------------------------------------------------------------------

# Load Modules

insmod /system/lib/modules/symsearch.ko
insmod /system/lib/modules/cpufreq_interactiveX.ko
insmod /system/lib/modules/cpufreq_hotplugX.ko
insmod /system/lib/modules/cpufreq_smartass2.ko
insmod /system/lib/modules/cpufreq_pegasusq.ko
insmod /system/lib/modules/cpufreq_boostedASS2.ko
insmod /system/lib/modules/cpu_control.ko
insmod /system/lib/modules/sio-iosched.ko

#echo 0 300 1025 > /proc/cpu_control/tweak_cpu
#echo 1 575 1200 > /proc/cpu_control/tweak_cpu
#echo 2 800 1325 > /proc/cpu_control/tweak_cpu
#echo 3 1050 1388 > /proc/cpu_control/tweak_cpu
#echo 4 1325 1398 > /proc/cpu_control/tweak_cpu

this is straight from the 90 modules in the rom

#!/system/bin/sh
#
#--------------------------------------------------------------------

# Load Modules

insmod /system/lib/modules/symsearch.ko
insmod /system/lib/modules/cpufreq_interactiveX.ko
insmod /system/lib/modules/cpufreq_hotplugX.ko
insmod /system/lib/modules/cpufreq_smartass2.ko
insmod /system/lib/modules/cpufreq_pegasusq.ko
insmod /system/lib/modules/cpufreq_boostedASS2.ko
insmod /system/lib/modules/cpu_control.ko
insmod /system/lib/modules/sio-iosched.ko

echo 0 300 1025 > /proc/cpu_control/tweak_cpu
echo 1 575 1200 > /proc/cpu_control/tweak_cpu
echo 2 800 1325 > /proc/cpu_control/tweak_cpu
echo 3 1050 1388 > /proc/cpu_control/tweak_cpu
echo 4 1325 1398 > /proc/cpu_control/tweak_cpu

thats what it should look like after. im just trying to be sure here what is going on.

Ok...... I commented out echo 0 ..... and now I am getting 1325 on both cores at 100% load (cpu-z).... performance gov and sio scheduler..... woo hoo

this is weird man you get 300 min now too or 575

300 min......... for now..... going to reboot and see if it sticks....

So far so GREAT!. installed late last night. I came from Rage 3.3 that has been SUPER laggy and glitchy (i dont think it was the ROMs fault), so i'm hoping that this one stays running great.

Question: I found the Power Toggle app and love the customization options, BUT how do i customize the power toggle that is already baked in to the shade?

You really can't its baked in as is. Sorry bud I wish I had a different answer. I am very glad you ate liking the ROM so far. The only time it has gotten laggy on me is with like 85% of available ram used up. Lol! Set up greenify and clean master and that will keep you moving right along!

Good morning guys, I am having problems flashing. I have deleted my rom slot and recreated and done all the wipes. The rom installs and starts booting but after the boot screens finish I get a error message saying Bloodrage messaging has stopped. So I hit ok and then goes a little further and I get to the start screen, hit the start button and the window saying Please wait this may take a few minutes comes up. I have left this up and running for 30 mins and it still keeps going. I have shut down deleted rom slot, wiped and re installed twice with the same problem. Any insight?
Thanks.

any chance of getting Tap-a-Talk support for this site?

Recreate the slot. Redownload and try again. Probably a bad DL.

jl90x wrote:Recreate the slot. Redownload and try again. Probably a bad DL.

You got it. Downloading now.

Stonecaster wrote:

jl90x wrote:Recreate the slot. Redownload and try again. Probably a bad DL.

You got it. Downloading now.

Thanks jl90 that did it you are the man!!!!!

Stonecaster wrote:

Stonecaster wrote:

jl90x wrote:Recreate the slot. Redownload and try again. Probably a bad DL.

You got it. Downloading now.

Thanks jl90 that did it you are the man!!!!!

You are very welcome!!! I hate to see anyone have problems! Glad you got it bud!!